_GOTOBOTTOM
Ships by Class/Type: Battleships
Topics from the Dreadnaught era to modern day.
Hosted by Steve Joyce
Mikasa 1902 with Pontos 1/200th.
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Saturday, December 08, 2018 - 09:33 PM UTC
Not being one to have an empty slipway for long. here is what will be taking following The Grand Old Lady.





The upgrade being for the 1905 fit may make this interesting, and a few temporal anomalies may creep in, for which I apologise in advance.

The kit hull.



below is a 6" ruler, (misplaced my 12")

Etched nameplate in the kit.



Contents of the Pontos set.

Deck & Torpedo nets.



etch.



Turned brass & resin.



Keel laying shortly.

Cheers

Si

d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 1,925 posts
Model Shipwrights: 1,298 posts
Posted: Sunday, December 09, 2018 - 12:41 AM UTC
Si,

With all of that PE she will be quite a challenge and at 1/200 there be no where to hide the errors. Looking forward to seeing this one come together.

Mark
Black_sheep
Visit this Community
Bayern, Germany
Joined: December 11, 2009
KitMaker: 823 posts
Model Shipwrights: 551 posts
Posted: Sunday, December 09, 2018 - 01:54 AM UTC
Oooh Simon there you have a very interesting lady laying at your table. She will keep you busy for a while for sure!


I have MERIT´s 1905 version together with the PONTOS set in my stash but until now I don´t feel fit enough for this task. Therefore I will carefully watch your efforts and already took a ticket for your build

Cheers

Thomas
Fordboy
Visit this Community
Auckland, New Zealand
Joined: July 13, 2004
KitMaker: 2,169 posts
Model Shipwrights: 1,597 posts
Posted: Sunday, December 09, 2018 - 06:19 AM UTC
Ahoy Simon

Wow now this is going to be a major build of one of my favourite ships.

Cant wait to see the updates.

Cheers


Sean
TimReynaga
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
Visit this Community
California, United States
Joined: May 03, 2006
KitMaker: 2,500 posts
Model Shipwrights: 1,830 posts
Posted: Sunday, December 09, 2018 - 06:30 AM UTC
Wohooo Si, looking forward to this one. Sign me up for a front row seat!

RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Sunday, December 09, 2018 - 08:44 AM UTC

Quoted Text

Si,

With all of that PE she will be quite a challenge and at 1/200 there be no where to hide the errors. Looking forward to seeing this one come together.

Mark



Thanks Mark,

Glad to have you along. it is going to be interesting, but compared to the other subjects in this scale, this is the smaller, and I hope the less challenging option to start with.

Cheers

Si
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Sunday, December 09, 2018 - 08:57 AM UTC

Quoted Text

Oooh Simon there you have a very interesting lady laying at your table. She will keep you busy for a while for sure!


I have MERIT´s 1905 version together with the PONTOS set in my stash but until now I don´t feel fit enough for this task. Therefore I will carefully watch your efforts and already took a ticket for your build

Cheers

Thomas



Glad to have you along Thomas.

I don't think you have any worries on that score from watching you builds).

I look at it like this, it isn't that much more complex than some 1/35oth builds, and most of the etched parts are larger, what can go wrong!

(There is a possibility we will find out.)

Cheers

Si


RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Sunday, December 09, 2018 - 08:59 AM UTC

Quoted Text

Ahoy Simon

Wow now this is going to be a major build of one of my favourite ships.

Cant wait to see the updates.

Cheers

Sean



Thanks Sean,

Glad to have you along for the ride mate. You won't have to wait long, I started on the destruction today, more like steel cutting (well plastic) than keel laying.

cheers

Si

RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Sunday, December 09, 2018 - 09:02 AM UTC

Quoted Text

Wohooo Si, looking forward to this one. Sign me up for a front row seat!




Welcome aboard Tim.

Your seat is reserved.

Cheers

Si

YellowHammer
#513
Visit this Community
Alabama, United States
Joined: March 28, 2006
KitMaker: 554 posts
Model Shipwrights: 219 posts
Posted: Sunday, December 09, 2018 - 01:41 PM UTC
Looking forward to following along
John
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Sunday, December 09, 2018 - 08:39 PM UTC

Quoted Text

Looking forward to following along
John



welcome aboard John,

Glad to have you along for the ride.

Cheers

Si
RussellE
#306
Visit this Community
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
Model Shipwrights: 2,777 posts
Posted: Monday, December 10, 2018 - 12:00 AM UTC
I've often thought of getting the 1/350 kit of this one Si, with the Pontos upgrade, but now I can watch yours instead
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Monday, December 10, 2018 - 12:40 AM UTC

Quoted Text

I've often thought of getting the 1/350 kit of this one Si, with the Pontos upgrade, but now I can watch yours instead



Glad to have you aboard mate.


It is my intention to build the 1/350th version at some point, that will be in 1905 fit, there are some quite noticeable differences.

Cheers

Si
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Monday, December 10, 2018 - 05:40 AM UTC
Steel (Plastic) cutting has started.

Removal of all details to be replaced by etch & turned parts.

the starboard hull half removed from the sprue.



The ruler is 12" or 30cm in new money.


The before shot, the iron ladders - shows the stern chase ports, as the shot of the hawse holes wasn't clear.



Moulded on Iron ladders removed from around the Hawse holes.



And from around the stern chase ports. The doors out on to the admiral's walk have been sanded back as well.



Anchor stowage detail removed.



A few other bits and pieces removed and started drilling out port holes.



Port holes done,



Now just the maindeck to prep and we can get on with the build.

Cheers

Si
warreni
Visit this Community
South Australia, Australia
Joined: August 14, 2007
KitMaker: 5,926 posts
Model Shipwrights: 2,624 posts
Posted: Monday, December 10, 2018 - 02:28 PM UTC
Watching with interest Si.

Did Pontos give you a guide to what you should sand off the hull?

Is this the 1902 version of the ship or are you adapting a 1905 Pontos set to a 1902 version?

Cheers
Warren
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Model Shipwrights: 249 posts
Posted: Monday, December 10, 2018 - 09:22 PM UTC
Si,
You are a machine! Looking forward to seeing you do this one!


Gaz
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Monday, December 10, 2018 - 09:38 PM UTC

Quoted Text

Watching with interest Si.

Did Pontos give you a guide to what you should sand off the hull?

Is this the 1902 version of the ship or are you adapting a 1905 Pontos set to a 1902 version?

Cheers
Warren



Hi Warren,

I am adapting, as much as possible the Pontos set to work with the 1902 version. The most notable differences are the fighting tops and the vent cowls on the 1902 version. I will admit now I may end up with a few temporal anomalies, as I cannot find much in the way of clear photographs of the ship in this era.

Cheers

Si
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Monday, December 10, 2018 - 09:53 PM UTC

Quoted Text

Si,
You are a machine! Looking forward to seeing you do this one!


Gaz



Welcome aboard Gazza, glad to have you along for the ride.

Cheers

Si
TimReynaga
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
Visit this Community
California, United States
Joined: May 03, 2006
KitMaker: 2,500 posts
Model Shipwrights: 1,830 posts
Posted: Tuesday, December 11, 2018 - 05:12 AM UTC
Si, thanks for the great shots of the moldings - I'm seriously considering adding this Mikasa to the stash!
One thing though; I wonder why kit manufacturers so often assume that the plating detail on the hull sides ends at the waterline?

RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Tuesday, December 11, 2018 - 07:38 AM UTC

Quoted Text

Si, thanks for the great shots of the moldings - I'm seriously considering adding this Mikasa to the stash!
One thing though; I wonder why kit manufacturers so often assume that the plating detail on the hull sides ends at the waterline?





You are welcome Tim,

It is a very nicely moulded kit, and it has a comprehensive amount of etch included. I am just slightly mad when it comes to extras.

I have to agree, there is often quite a lot going on below the waterline, not only in the way of plating, but sea chests, overboard discharges etc, and most kits are a little bland below the waterline.


Cheers

Si
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Friday, December 14, 2018 - 07:48 AM UTC
This week's progress.

Still steel cutting.

The decks, a before & after of each section.













Test fitting the hull sections revealed some ejector pin marks that fouled the fit of the 6" gun deck.



Fixed.



Last job before keel laying, drilling out the holes for mounting the etched steps for the iron ladders.

Template for the Port hawse pipe steps taped in place.



And drilled with a 0.4mm bit.



Stbd stern chase gunport done, the template is sat on the hull.



The interior test fitted, In this shot the 6" gundeck is the wrong way round, it does actually have a arrow pointing to the bow on it, but I had missed that.



The Hull assembled, the central bulkhead is "fun" to get in the right place.



The fit of the hull halves were not the best fit along the bottom, but easily cured with a bit of filler.



Next job, 6" guns, then the externa detail on the hull.

Cheers

Si



d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 1,925 posts
Model Shipwrights: 1,298 posts
Posted: Friday, December 14, 2018 - 08:28 AM UTC
Si,

You are a brave fellow removing and cutting all of those molded on pieces. That is one step I always dread is hacking and slashing to make way for new pieces.

Mark
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Friday, December 14, 2018 - 10:01 AM UTC

Quoted Text

Si,

You are a brave fellow removing and cutting all of those molded on pieces. That is one step I always dread is hacking and slashing to make way for new pieces.

Mark




Hi Mark,

It still makes me a "little" nervous to say the least, but I reckon if it didn't it would massively increase the possibility of an unrecoverable mistake. One thing I have learned is that planning is the key.

Thanks for looking in mate.

Cheers

Si




rdt1953
Visit this Community
New Jersey, United States
Joined: February 06, 2015
KitMaker: 1,098 posts
Model Shipwrights: 34 posts
Posted: Friday, December 14, 2018 - 10:57 AM UTC
Hi Si -
I've been a bit of a lurker lately - modeling mojo gone a little flat but it always returns . I have been following your builds for a bit now and want to compliment you on your workmanship and I , like many , am amazed at your prolific output.
Keep it up - fuel for inspiration.
Cheers - Richard
GazzaS
#424
Visit this Community
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
Model Shipwrights: 249 posts
Posted: Friday, December 14, 2018 - 10:58 AM UTC
Si,
It'll be interesting seeing your plan come to fruition. The old ship was quite stout, eh? Quite a pronounced ram bow, too.

Gaz
 _GOTOTOP