login   |    register
E.T. Model [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Bastion Barrier
  • move

by: Seb Viale [ SEB43 ]


_ORGINPUB:
Armorama

introduction

ET Model has just released a series of different Bastion barriers in PE, three different sizes to be exact. All 3 are similar in materials and assembly steps, so this review will cover them all.

The HESCO bastion is both a modern gabion used for flood control and military fortification and the name of the British company that developed it in the late 1980s. It is made of a collapsible wire mesh container and heavy duty fabric liner, and used as a temporary to semi-permanent dike or barrier against blasts or small-arms. It has seen considerable use in Iraq and Afghanistan. Specifically, the brand name for the barrier is 'Concertainer', with 'HESCO Bastion' being the British company that produces it, though the barrier itself is quite generally referred to as a HESCO Bastion, or simply "Hesco".

Originally designed for use on beaches and marshes for erosion and flood control, the HESCO Bastion quickly became a popular security device in the 1990. Hesco barriers continue to be used for their original purpose.

Filled with sand, 60 centimeters (24 inches) of barrier thickness will stop rifle bullets, shell fragments and other shrapnel. Approximately 1.2 meters (four feet) of thickness provides protection against most car bombs. It takes 1.5 meters (five feet) of thickness to prevent penetration by a rocket-propelled grenade round. In addition, HESCO bastions are even more effective than sandbags against water, which will not compromise the competence of the latter.

To date, only resin Bastion barriers were present on the market from different suppliers, quite expensive due to the quantity of resins and also very similar in terms of final top cover due to mold cost.

ET Model tackles the problem of prize and customization by releasing these different sets of bastion barrier.

the sets

Containing PE frets and light brown paper, 4 similar Bastions can be constructed per kit.
From my knowledge, this is the finest PE job I ever seen. The mesh is really well represented. The heavy duty fabric is represented with light brown paper. To obtain a better rendition I recommend using tissue paper (one layer) soaked with PVA glue and applied directly inside the cube. For filling, and due to the weight issue, I will also recommend to fill up the bastion with PS foam and glue sand, rocks and debris on a the upper layer. Try to differentiate each of the barriers by using different rubble and add some foot marks on top of them.

Each corner of the cubes have coil wire to assemble each barrier together. ET Model provides some PE bars to do this job, unfortunately these are square shaped and should be round. It will be better to use small copper wire to do the job.

I would like to also draw your attention to the fact that these kits can be a good source of PE to reproduce QinetiQ mesh as RPG protective slat as seen on various NATO vehicles.

conclusion

These kits are a really great release from ET Model and can be used for diorama purposes, and to improve the look of different vehicles.
SUMMARY
Highs: Nice details on the PE. Easy assembly.
Lows: The brown paper does not provide a good representation of the heavy duty fabric.
Verdict: Highly recommended with some modification of the fabric. Can be used for Anti-RPG net also.
Percentage Rating
95%
  Scale: 1:35
  Mfg. ID: Kit EA35-063, EA35-064, EA35-065
  Related Link: 
  PUBLISHED: Jul 08, 2012
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.06%
  MAKER/PUBLISHER: 87.07%

About Seb Viale (seb43)
FROM: PARIS, FRANCE

Back to Europe, I am living in Paris since december 2011 with my Wife. We have a nice 6 years old daughter, and a 3 years Baby boy. I am doing AFV modern era. I started when I was a teenager , back to business after 10 years of break due to Sport (Baseball, yes european plays baseball) and Unive...

Copyright 2019 text by Seb Viale [ SEB43 ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Model Shipwrights. All rights reserved.



Comments

I've been looking at other manufacturers for bastion barriers and am glad to see ET release a set. I'll definitely be using these, as I am currently hooked on modern Afghanistan and the Middle East.
JUL 08, 2012 - 02:57 AM
Hi Seb I agree that the PE mesh looks nice...but the size is off for the Hesco one. According to the specs found on Hesco's website, the mesh size is 76.2mm x 76.2mm (3 x 3)= 2,1 mm in 1/35th scale.... E.T. (and Voyager too - I've bought both sets) mesh size is 1 mm x 1 mm (between wires).So OK this mesh will certainly be useful but not for accurate Hesco bastions. Edit : I guess a picture would be better. The mesh on the left is from E.T. Model's set. The mesh on the right (2 x 2 mm) is from Scale Link set SLF080 : Am I nit-picking too much ? Frenchy
JUL 08, 2012 - 04:37 AM
Yes you are right regarding the size. I was at Eurosatory to see the real one and yes you are right. But the level of printing/etching is pretty greart. I was not aware on the Voyager set. Thanks for pointing these out. Frenchy the pic you post is from you?? Scan?? Seb
JUL 08, 2012 - 05:10 AM
Not at all Frenchy, that's quite a size difference. You would have to remove a "+" out of each block to correct it. Thanks for the info
JUL 08, 2012 - 05:12 AM
Yes. I was too lazy to take a picture I've been searching high and low for some accurate Hesco mesh for quite a long time and I was happy to see E.T. Models and Voyager releasing these sets...This was before seeing them "in the flesh" I wonder why these guys haven't done their homework (licensing issues ?)... Frenchy
JUL 08, 2012 - 06:24 AM
   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move