login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Ships by Class/Type: Military Small Craft
For topics on PT boats, landing craft, Vietnam riverine, etc.
Hosted by Todd Michalak
Schnellboot Typ S-38 / 1:35 of Italeri
elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Wednesday, January 31, 2018 - 11:35 PM GMT+7
Hello everybody,

a new project started .... the Schnellboot S-38 in scale 1:35 of Italeri... the new huge kit based on the older S-100 kit.

Some upgrade parts will come from Eduard (etched parts of the S-100), some etched parts of Royal Model for the Bofors, some sea mines of Schatton, gun barrels of Master Model and detailed parts of Shapeways.

But first lot of putty is necessary to cover the areas where the bolts were used for mounting the two halfes of the hull...






Cheers
Micha
Grauwolf
#084
Visit this Community
Quebec, Canada
Joined: September 14, 2005
KitMaker: 2,158 posts
Model Shipwrights: 1,117 posts
Posted: Thursday, February 01, 2018 - 02:32 AM GMT+7
Great start Michael...will follow with interest.
Cheers,
Fordboy
Visit this Community
Auckland, New Zealand
Joined: July 13, 2004
KitMaker: 2,142 posts
Model Shipwrights: 1,574 posts
Posted: Thursday, February 01, 2018 - 05:32 AM GMT+7
Ahoy Michael

Another great build.

Looking forward to this one.

Cheers

Sean
TAFFY3
Visit this Community
New York, United States
Joined: January 21, 2008
KitMaker: 2,363 posts
Model Shipwrights: 1,230 posts
Posted: Friday, February 02, 2018 - 06:25 AM GMT+7
Good start, look forward to seeing more. I saw photos of this boat built up and displayed by Italeri, taken at the Nuremburg show. Looks like the error made in the diameter of the forward gun tub in the S-100 kit was not corrected. It is still too small.



Gunner would not fit behind the gun. Al
elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Monday, February 05, 2018 - 02:00 AM GMT+7
Hello everybody,

several rounds of sanding, putty, sanding, primering, putty,..... later - it is done. The surface is smooth and ready to continue.

Next step will be the torpedotuebes and the new rivets at the bow where I lost them during the sanding process... then I will take care of the display.




TimReynaga
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
Visit this Community
California, United States
Joined: May 03, 2006
KitMaker: 1,513 posts
Model Shipwrights: 1,133 posts
Posted: Monday, February 05, 2018 - 02:24 AM GMT+7

Quoted Text

... rounds of sanding, putty, sanding, primering, putty,..... later - it is done. The surface is smooth and ready to continue...



Hi Michael,

That is boring stuff, to be sure, but taking care of these tasks now assures that things will look their best later! Solid work so far, I look forward to watching your progress.

elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Thursday, February 08, 2018 - 12:46 AM GMT+7
Hello everybody,

the hull is done, sanded and smooth now. The riverts at the bow were added and secured with a layer clear coat.

The ship will get a white wooden base with two feed made of aluminium pipe, cut already, now sanding it in the shape of the hull next.




xrz100
Visit this Community
Berlin, Germany
Joined: May 28, 2010
KitMaker: 184 posts
Model Shipwrights: 177 posts
Posted: Thursday, February 08, 2018 - 05:42 AM GMT+7
Hello Michael, nice progress. Can you provide more details how you added thoses rivest to the front. I still have somewhere ARCHER rivets, but actualy I am a HULK in applying them. You leave them on the foil? and glue it to the hull? Please enlight me

greetings from Berlin

Christian
elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Friday, February 09, 2018 - 02:04 AM GMT+7
Hi Christian,
these are decals.... normal decals.... cut the length of the decal you need, put the decal in the water .... apply it where you need it ... done I have fixed it with a layer clear coat after that to secure it during the further works as I will paint the hull later. If you paint it directly afterwards then no clea coat will be necessary I think
Cheers
Michael
Grauwolf
#084
Visit this Community
Quebec, Canada
Joined: September 14, 2005
KitMaker: 2,158 posts
Model Shipwrights: 1,117 posts
Posted: Friday, February 09, 2018 - 04:15 AM GMT+7
Excellent work....those extra details will really pay off in the end!

Just curious, what is that circular disc behind the 2cm gun position as
seen in the posted photo of the finished model?
Cheers,
Joe
TAFFY3
Visit this Community
New York, United States
Joined: January 21, 2008
KitMaker: 2,363 posts
Model Shipwrights: 1,230 posts
Posted: Friday, February 09, 2018 - 10:41 AM GMT+7

Quoted Text

Excellent work....those extra details will really pay off in the end!

Just curious, what is that circular disc behind the 2cm gun position as
seen in the posted photo of the finished model?
Cheers,
Joe




That's the foul-weather cover for the gun tub. Al
Grauwolf
#084
Visit this Community
Quebec, Canada
Joined: September 14, 2005
KitMaker: 2,158 posts
Model Shipwrights: 1,117 posts
Posted: Friday, February 09, 2018 - 12:16 PM GMT+7
Thanks Al,
Ok, so I have seen many pictures with the cover attached since I posted that question
but then, were did they put the 2cm and its mount...was it stored below deck?
I figure kind of heavy for a couple of crew members to move.

Cheers,
Joe
TAFFY3
Visit this Community
New York, United States
Joined: January 21, 2008
KitMaker: 2,363 posts
Model Shipwrights: 1,230 posts
Posted: Friday, February 09, 2018 - 03:07 PM GMT+7

Quoted Text

Thanks Al,
Ok, so I have seen many pictures with the cover attached since I posted that question
but then, were did they put the 2cm and its mount...was it stored below deck?
I figure kind of heavy for a couple of crew members to move.

Cheers,
Joe



I believe the gun mount could unlocked, and swung down into the tub. They probably would remove the barrel. Al
Grauwolf
#084
Visit this Community
Quebec, Canada
Joined: September 14, 2005
KitMaker: 2,158 posts
Model Shipwrights: 1,117 posts
Posted: Friday, February 09, 2018 - 03:51 PM GMT+7
Hi Al,

Ok, I see...that makes sense.

THANKS again!
Cheers,
Joe
Ed-209
Visit this Community
England - East Anglia, United Kingdom
Joined: February 11, 2018
KitMaker: 6 posts
Model Shipwrights: 6 posts
Posted: Sunday, February 11, 2018 - 10:37 AM GMT+7
Hi new here have this one in the stash for when i finish my G5 looking forward to seeing how you get on
elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Monday, March 05, 2018 - 09:24 PM GMT+7
Hello everybody,

I have added some wiring and further instruments and details at the interior of the structure ....






xrz100
Visit this Community
Berlin, Germany
Joined: May 28, 2010
KitMaker: 184 posts
Model Shipwrights: 177 posts
Posted: Wednesday, March 07, 2018 - 07:18 PM GMT+7
very nice progress Michael, with a lot of details, thank you for buying my products from Shapeways. IMHO especially the Torpedotargeting computer and the Torpeodtube ends benefit from more details.

But Michael what is the metal plate in the middle of the Targeting computer?

Greeting fom IRON Models https://www.shapeways.com/shops/iron-models
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 5,179 posts
Model Shipwrights: 4,764 posts
Posted: Saturday, March 10, 2018 - 10:56 PM GMT+7
Interior is coming on really nicely Michael,

Loving all the extra detail.

Now I really want one of these.

Cheers

Si
elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Thursday, May 03, 2018 - 12:37 AM GMT+7
Hello everybody,

Vallejo's black primer as base coat, the further colors airbrushed only in thin, not covering layers to keep the black base as shadow color.

Paints used next:

Schnellbootweiß (S-Boat white): Insignia White + Light Grey
Under water: Red/Brown
Main Deck: Dark grey
Stripes: White & Red

All these paints are of Mission Models.


Some first damages on the red stripes added already, some further scratches and damages on the other areas follow, but first some further details brush painted all around the ship.... then oil color washs ...












Cheers
Micha

Fordboy
Visit this Community
Auckland, New Zealand
Joined: July 13, 2004
KitMaker: 2,142 posts
Model Shipwrights: 1,574 posts
Posted: Thursday, May 03, 2018 - 07:16 AM GMT+7
Ahoy Michael

Great work with the paint I like how its progressing.

Thanks for the update.

Cheers


Sean
d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 494 posts
Model Shipwrights: 166 posts
Posted: Thursday, May 03, 2018 - 01:42 PM GMT+7
Nice weathering you added. She is really shaping up nicely.
awiskerke
Visit this Community
Netherlands
Joined: December 09, 2008
KitMaker: 293 posts
Model Shipwrights: 290 posts
Posted: Friday, May 04, 2018 - 08:45 PM GMT+7
Hi Michael, lovely modelling and detailing job! I only noticed today that Italeri has released this new kit .


Regards,


Arjan
elmarriachi
Visit this Community
Baden-Württemberg, Germany
Joined: December 26, 2009
KitMaker: 778 posts
Model Shipwrights: 301 posts
Posted: Sunday, May 06, 2018 - 09:08 PM GMT+7
Hello everybody,

I made the wooden optics with different oil colors and a stiff brush, on a base paint in beige colors.
Metal colors Iron and Brass were used for the details ...
All this area remains good visible through the open doors left and right and the huge windows...





Cheers
Micha
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 904 posts
Model Shipwrights: 684 posts
Posted: Sunday, May 06, 2018 - 09:48 PM GMT+7
Great wood work! I love the detail you have added in the cabin.

cheers
Michael