1⁄35Mold Making and Resin Casting
Making your MoldsThere has been quite a lot of recent interest in this subject so I figured I would help out and contribute a step by step article on how to go through the process of mold making and reproducing parts in resin.
First of all, let's go through the materials you will need to get started.
- Clean mixing bowls - Plastic rubbermaid type works the best
- Spatulas - The flexible kind that you would frost a cake with
- Mixing cups ( I use the clear plastic drinking cups you can buy at a discount store or supermarket. They come in different sizes and usually have lines molded into the sides of them which makes 1/1 mixing easier)
- Wooden stir sticks
- Rubbing alcohol
- Vaseline (petroleum jelly)
- Different sized small paint brushes (cheap ones, not your Winsor and Newtons!)
- Some clean rags - for wiping spills and your hands!
- Sharp Hobby Knife
- Plasticine clay (Any non sulfurous clay such as Kleen Klay)
There are other materials that will be discussed as we go along, so you may want to make note of them
Copyright ©2019 by Steve Sherman. _OPINIONS Model Shipwrights, KitMaker Network, or Silver Star Enterrpises. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Model Shipwrights. All rights reserved. Originally published on: 2005-01-03 00:00:00. Unique Reads: 48614