_GOTOBOTTOM
Ships by Class/Type: Submarines
Topics on submarines of all types and eras.
Seehund at Ijmuiden 1945 (Bronco 1/35)
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Monday, October 11, 2010 - 01:46 AM UTC
Already bought from my local dealer in july, the new Bronco Seehund kit was inspected, but not assembled immediately. As always I came down with a research-disease; all sorts of sources were raked up to find informations concerning this german midget submarine. So I was able to snatch the book „Die Seehunde“ by Klaus Mattes there I found some infos about the german K-Verband in Ijmuiden/Netherlands 1945. Together with the appearance of MiniArts new „river embankment“ an idea to present the Seehund was born. Only sitting on his stand to get dusty shouldn’t become his destiny...
So it came to this realisation:

The basis for my idea:


First steps:
The MiniArt vacuparts

assembled to this part of quay wall


Basis for the display was a picture frame (bought from a supermarket at a price of 3.99 €) with dimensions 20x42cm.
To create the water a piece of seafoil (HO-railway accessory by Faller) was used; the method to use silicone was too complicated form e to show such a little piece of harbor water. The Verlinden Seehund took place in the water and the Bronco Seehund will find his place jacked up on the quay:

The backwall to beart he quay was built by plates of styrofoam (also Faller).

The undercoat of this parts is "Chaos black" (spray can Games Workshop)

Single bricks were painted by a brush; the following Tamiya colors were used: XF-9 Hull Red, XF-50 Field Blue and XF-63 German Grey – looks strange, but after drybrushing with XF-53 Neutral Grey and XF-54 Dark Sea Grey this was the result:


The water edge with XF-2 White and XF-65 Field Grey was spoted dry.
A curious drawing on the water was a later droped attempt to simulate a bit of the underwater parts of a Seehund.
The next step was wood. Some beech rods were cut to build the poles, but at first they were grated with a needle and later painted grey:


The gap between the wall and the water was filled with water thinned casein glue – on this pic not yet dried, but when dry it will appear transparent.

Some rust arround the iron rings (Tamiya pigment) and of course some gulls sh... shouldn’t be missed:


I think it’s satisfying up to, but now to the boats:
They were built OOB, only with some small adds: limiters fort he rudders and grap handles near the hatch:




The assembly went on without any problems, filling wasn’t neccessary.
Both Seehunde are of different variants and built by different wharfs. Only some openings on the „roof“ were aligned with the originals.
The boats were airbrushed: XF-24 Dark Grey after blackening the flood holes;nachdem die Flutschlitze geschwärzt wurden; the Bronco Seehund got a white conning tower due to the Ijmuiden pics:


Aging by thinned paint /XF-9 Hull Red) and some drybrushing:









The scapermarks and the tracks of walking were made with a silver pencil

This is it till now – only some little adds to the boats – and thnn: the figures!
It wasn’t easy to find a soldier with a dufflecoat to show Gen. Foulkes, but I found him!


To be continued...

Finally some pics of the mockup:








Michael
MrMox
Visit this Community
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
Model Shipwrights: 985 posts
Posted: Monday, October 11, 2010 - 01:49 AM UTC
Very nice work!

I really like the discoloration on the hull.

Cheers/Jan
Gremlin56
Joined: October 30, 2005
KitMaker: 3,897 posts
Model Shipwrights: 3,301 posts
Posted: Monday, October 11, 2010 - 02:30 AM UTC
Hi Michael, that is a fantastic piece of work. The quay and the Seehund look the part. The setting will fool everyone except anyone living or working in IJmuiden
I first visited IJmuiden during the years I spent with Smit-Lloyd and one of the principle offshore bases was the IJ-bunker. The IJ-bunker is a large German built bunker where the midget subs were stored for maintenance and to shelter from Allied bombing missions. This is how the bunker looks nowadays:


(photo is copyright of a colleague of mine working at the VTS in IJmuiden,René Sehr)

Despite an attempt to demolish it just after the Second WW it has stubbornly survived and is used nowadays to store bulk products.
A second bunker at the root end of the Vissershaven sheltered the S-boat flotillas working out of IJmuiden, ( at 30 knots Great Yarmouth wasn't too far away). This bunker was demolished by RAF tallboy bombs just before the War ended.

Cheers,
Julian

Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Monday, October 11, 2010 - 03:18 AM UTC
Hello Julian,
it was also this pic of the quay at the little lock at Ijmuiden that sounds good to me with the wooden poles:


Michael
Gremlin56
Joined: October 30, 2005
KitMaker: 3,897 posts
Model Shipwrights: 3,301 posts
Posted: Monday, October 11, 2010 - 03:45 AM UTC
If you go to Google maps and look for the steigerweg you will find the location this photo was taken: just to the south east of the South- and Small locks. The whole area has since been rebuilt . Nice photo though !
Cheers,
Julian
skipper
Visit this Community
Lisboa, Portugal
Joined: February 28, 2002
KitMaker: 5,182 posts
Model Shipwrights: 4,070 posts
Posted: Monday, October 11, 2010 - 05:29 AM UTC
Excellent project Michael!

Keep us posted please,
Tschuss,
Rui
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Tuesday, October 12, 2010 - 01:25 AM UTC
At first I want to convert a hen but a friend (thanks Arjan!) brought Tamiyas „German tankers at rest“ to my mind. So I altered a crow; twisted wire as new feet located more forward and a rasped beak were neccessary:

... tada – gull in place:


Now to the figures (Italeri, Wolf and Hornet):

Primed with chaos black .

And back to the seals fur – some flash rust was added (Tamiya pigment):


And again the intended placement:







Michael
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Tuesday, October 12, 2010 - 10:10 PM UTC
Nice work Micheal.

The Mini Art Dockside looks effective, did that all come from one set?. Iam curious, as I can see it coming in very handy with all the 1/35th marine subjects around and coming.

Si
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Wednesday, October 13, 2010 - 12:44 AM UTC
Hello Simon,
I've used 2 sets of MiniArts river embankment. You can see the joint of the walkway above the 4th pole from the left; this joint will be covert with a rope or something else. The joint between the 2 wallparts is hidden behind the 4th pole.




Michael
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Wednesday, October 13, 2010 - 06:43 AM UTC
Today was a sunny autumn day in Germany - little time to spend in a harbour, so I was nuts about flowers:


dandelion by Fredericus rex; 13 and 8 parts.

general view:




Michael
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 7,078 posts
Model Shipwrights: 6,649 posts
Posted: Wednesday, October 13, 2010 - 09:47 PM UTC
Thanks Micheal,

I do like the additions of the seagull & the dandilions, it is that sort of attention to detail that really brings dioramas to life.

Si
AlanL
Visit this Community
England - East Anglia, United Kingdom
Joined: August 12, 2005
KitMaker: 14,499 posts
Model Shipwrights: 1,919 posts
Posted: Sunday, October 17, 2010 - 02:12 AM UTC
Hi Michael,

Looking excellent so far, I like you gull .

Kits are PDG too.

Al
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Tuesday, October 19, 2010 - 07:46 AM UTC
'cause there's a little trouble with my figures the first Seehund ws launched; the gap between the flat bottom side of the boat and the wavy surface of the seafoil was filled with severall layers of whiteglue:

...and some pics found in grandpas old photoalbum

...as a last gimmick:


to be continued...


Michael
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Sunday, October 24, 2010 - 04:01 AM UTC
...and it was time to start with the figures; here the first attempt with "my" canadiens:

 
this could have been found in grandpas old photo album,

but some details have to be added. Not sooo bad for a first try, I think

Michael
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Sunday, October 31, 2010 - 08:56 AM UTC
Some days ago I found a kit review concerning the Bronco Seehund http://www.modellmarine.de/index.php?option=com_content&view=article&id=2512:bronco-models-unterseeboot-typ-xxvii-b5-qseehundq-135&catid=286:bro.

Unfortunatelly in german language, but showing some pics of an original Seehunds "roof". And that's the problem! The Bronco guys went to Brest to examine the Seehund, that was used by the french navy after WW2 and is now part of an exhibition at the local museum. But the french navy rebuilt the roof ...
Here my first attempt for my Seehund (just ready - aarghh!) with a very thin ps-material:



...and here the result with a second kits tower:



All kit material looking through the cutouts will be removed - nice job with a nearly finished model!

... to be continued.


Michael
Gotrek58
Visit this Community
Nordrhein-Westfalen, Germany
Joined: January 11, 2009
KitMaker: 673 posts
Model Shipwrights: 386 posts
Posted: Tuesday, July 05, 2011 - 10:36 AM UTC
Finished!
Without the tower corrections - an improved Seehund will follow with my next diorama; maybe a scene from "Bunker Konrad", the sheltered production plant at Kiel 1945.
Here's my 1st finished diorama - I hope you like it:












Michael
MrMox
Visit this Community
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
Model Shipwrights: 985 posts
Posted: Tuesday, July 05, 2011 - 10:53 AM UTC
Do we like it ? - oh yes !!! nice to see it finished after a long break.

Cheers/Jan

Ps. Im sure the editors would like a photo feature on this one
goldenpony
Visit this Community
Zimbabwe
Joined: July 03, 2007
KitMaker: 3,529 posts
Model Shipwrights: 2,419 posts
Posted: Tuesday, July 05, 2011 - 12:27 PM UTC
Oh, yes a very nice project indeed. I cannot believe I did not see this back when it was originally posted.

Michael, I would like very much to have this whole project as a feature.

Bizarre
Visit this Community
Akershus, Norway
Joined: July 20, 2010
KitMaker: 1,709 posts
Model Shipwrights: 3 posts
Posted: Tuesday, July 05, 2011 - 12:43 PM UTC
cool work, congratulations!
Grumpyoldman
Staff Member_ADVISOR
KITMAKER NETWORK
Visit this Community
Florida, United States
Joined: October 17, 2003
KitMaker: 15,338 posts
Model Shipwrights: 981 posts
Posted: Tuesday, July 05, 2011 - 09:22 PM UTC
That turned out really nice, something to be proud of.
AlanL
Visit this Community
England - East Anglia, United Kingdom
Joined: August 12, 2005
KitMaker: 14,499 posts
Model Shipwrights: 1,919 posts
Posted: Tuesday, July 05, 2011 - 09:55 PM UTC
Hi Michael,

A most excellent project, nice work indeed.

Al
Robert75013
Visit this Community
Paris, France
Joined: March 08, 2009
KitMaker: 242 posts
Model Shipwrights: 240 posts
Posted: Tuesday, September 06, 2011 - 10:38 PM UTC
Your dio was beautifully, well masterly should I say, conducted, Michael!
Congrats, really.

(Berliner weiß bier)
Robert
spaarndammer
Visit this Community
Noord-Holland, Netherlands
Joined: January 28, 2007
KitMaker: 1,945 posts
Model Shipwrights: 13 posts
Posted: Wednesday, September 07, 2011 - 10:03 AM UTC
What a most beautiful piece of modeling is shown here. Congrats with finishing it.

If someone is interested in some extra info about the ijbunker in ijmuiden, there is a website about it with some nice photos. It is in Dutch, but Google Translate may be of help.

http://www.ijbunker.nl/



Jelger
 _GOTOTOP