Hi everyone.
Would the rigging on a U-boat show slack towards the end of a patrol. The rigging is really slack on my build and regardless of what I do, it will not tense up. Also, I want to replicate the tensioners using a drop of Elmer's glue. I read of someone doing this with success. Any suggestions?
You are viewing the archived version of the site.
Go to modelshipwrights.com for the current dynamic site!
Go to modelshipwrights.com for the current dynamic site!
General Ship Modeling: Super-detailing
Topics on photo-etch, metal-parts, and all types of additional detailing.
Topics on photo-etch, metal-parts, and all types of additional detailing.
Hosted by Jim Starkweather
U-boat Rigging
AlexB1969
Alabama, United States
Joined: July 12, 2013
KitMaker: 205 posts
Model Shipwrights: 59 posts
Joined: July 12, 2013
KitMaker: 205 posts
Model Shipwrights: 59 posts
Posted: Tuesday, July 22, 2014 - 11:17 AM UTC
Posted: Wednesday, July 23, 2014 - 01:35 AM UTC
Hi Alex,
In most photos I have seen, there is a very slight sag on
these cables.
As far as the "tensioners", are you referring to the insulators?....the little oval shaped things on the cables.
What scale are you building in?.....they are included in 1:72.
If building in 1:144 or 1:350, white glue applied in thin layers will do the job.
Cheers,
Joe
In most photos I have seen, there is a very slight sag on
these cables.
As far as the "tensioners", are you referring to the insulators?....the little oval shaped things on the cables.
What scale are you building in?.....they are included in 1:72.
If building in 1:144 or 1:350, white glue applied in thin layers will do the job.
Cheers,
Joe
AlexB1969
Alabama, United States
Joined: July 12, 2013
KitMaker: 205 posts
Model Shipwrights: 59 posts
Joined: July 12, 2013
KitMaker: 205 posts
Model Shipwrights: 59 posts
Posted: Thursday, July 24, 2014 - 06:18 AM UTC
Thanks Joe.
I'm building the 1/72 VIIC. It's a big boat, that's for sure. I think I'm just going to spring for the White Ensign set to use the insulators. White Ensign also has a lycra rigging. Any idea what the scale would be for the 1/72 boat? Or, if I bought fishing line, what would be a good choice. The thread that comes with the kit isn't convincing.
Thank you.
Alex
I'm building the 1/72 VIIC. It's a big boat, that's for sure. I think I'm just going to spring for the White Ensign set to use the insulators. White Ensign also has a lycra rigging. Any idea what the scale would be for the 1/72 boat? Or, if I bought fishing line, what would be a good choice. The thread that comes with the kit isn't convincing.
Thank you.
Alex