_GOTOBOTTOM
New Content
Announcements on new content additions to the site.
Italeri Re-releasing PT Boat Crew Set
TAFFY3
Visit this Community
New York, United States
Joined: January 21, 2008
KitMaker: 2,531 posts
Model Shipwrights: 1,244 posts
Posted: Tuesday, February 10, 2015 - 01:33 AM UTC
Italeri is finally going to re-release their long unavailable 1/35 PT Boat Crew Set (#5606).



This is the original 10 figure set not the newer one (#5616) that they released for their PT-109 kit. Good news for PT fans. Now if they'll only complete the series with a 77' Elco and a 78' Higgins! Are you listening Italeri? Al
Biggles2
Visit this Community
Quebec, Canada
Joined: January 01, 2004
KitMaker: 7,600 posts
Model Shipwrights: 833 posts
Posted: Tuesday, February 10, 2015 - 04:48 AM UTC
According to some peoples' claims - Merit could take these figures and pantograph them too down to 1/48 for their PT boats. But seriously, somebody should make a 1/48 crew - preferably in plastic.
TAFFY3
Visit this Community
New York, United States
Joined: January 21, 2008
KitMaker: 2,531 posts
Model Shipwrights: 1,244 posts
Posted: Tuesday, February 10, 2015 - 08:25 AM UTC

Quoted Text

According to some peoples' claims - Merit could take these figures and pantograph them too down to 1/48 for their PT boats. But seriously, somebody should make a 1/48 crew - preferably in plastic.



I think Merit would do better starting from scratch rather than trying to down-size these figures. I was kinda surprised that when the Italeri 109 came out no resin manufacturer stepped up with a JFK figure at the very least. Al
Weebles
Visit this Community
United States
Joined: May 01, 2010
KitMaker: 93 posts
Model Shipwrights: 89 posts
Posted: Tuesday, February 10, 2015 - 09:04 AM UTC
I reached out to most of them. None had any interest.
Dave
Biggles2
Visit this Community
Quebec, Canada
Joined: January 01, 2004
KitMaker: 7,600 posts
Model Shipwrights: 833 posts
Posted: Tuesday, February 10, 2015 - 09:18 PM UTC

Quoted Text



I think Merit would do better starting from scratch rather than trying to down-size these figures. Al


That was to be taken with a really BIG grain of salt!
dioman13
Visit this Community
Indiana, United States
Joined: August 19, 2007
KitMaker: 2,184 posts
Model Shipwrights: 204 posts
Posted: Wednesday, February 11, 2015 - 06:27 AM UTC
Thanks for the heads up Al, put in my order for 2 sets. Even with the problems you mentioned, it's what we have to work with so I figured with both sets enough for the 103 class Elco and enough left over for all the landing craft and a Higgins if and when it sees daylight past my dreams. Again, are you listening Italeri, a 78' Higgins pretty please.
 _GOTOTOP