You are viewing the archived version of the site.
Go to modelshipwrights.com for the current dynamic site!
Go to modelshipwrights.com for the current dynamic site!
General Ship Modeling
Discuss modeling techniques, experiences, and ship modeling in general.
Discuss modeling techniques, experiences, and ship modeling in general.
Hosted by Jim Starkweather
Adhesive?
Enigma1
Minnesota, United States
Joined: February 22, 2010
KitMaker: 53 posts
Model Shipwrights: 9 posts
Joined: February 22, 2010
KitMaker: 53 posts
Model Shipwrights: 9 posts
Posted: Wednesday, June 17, 2015 - 09:41 PM UTC
I am having problems with attaching photo etch. I have tried everything from Tamiya Thin Cement to watering down Elmer's white glue. I have ordered some Gator's thin blend hoping this might solve my problems. I am trying to attach life rings and porthole eyebrows to my 1/200 Bismarck and things aren't working well. Any help would be appreciated.
Posted: Wednesday, June 17, 2015 - 10:14 PM UTC
Scott,
I use Gator Glue, thick and thin, almost exclusively for my PE work. I find that it provides a ecure attachment and time to make adjustments when necessary.
Dave
I use Gator Glue, thick and thin, almost exclusively for my PE work. I find that it provides a ecure attachment and time to make adjustments when necessary.
Dave
GrantGoodale
Ontario, Canada
Joined: April 26, 2015
KitMaker: 99 posts
Model Shipwrights: 99 posts
Joined: April 26, 2015
KitMaker: 99 posts
Model Shipwrights: 99 posts
Posted: Thursday, June 18, 2015 - 04:54 AM UTC
I have not used Gator glue so I cannot comment on that product. White glue will work but do not water it down very much, if at all. Otherwise, CA glue is what you need.
HTH
HTH
ejhammer
Michigan, United States
Joined: June 10, 2008
KitMaker: 230 posts
Model Shipwrights: 136 posts
Joined: June 10, 2008
KitMaker: 230 posts
Model Shipwrights: 136 posts
Posted: Thursday, June 18, 2015 - 06:45 AM UTC
Quoted Text
I use Gator Glue, thick and thin, almost exclusively for my PE work. I find that it provides a ecure attachment and time to make adjustments when necessary.
I second that. For railings, I tack it in place with CA, then run a fine bit of Gators Glue along the join.
Doors, portholes etc just sticks flat on with it.
EJ
Posted: Thursday, June 18, 2015 - 09:49 AM UTC
Gator glue here as well for railings and almost every other fitting, make sure the glue is mixed (little shake should do) and has not frozen while in storage, apply with a cocktail stick or very thin off cut of wood. Brass on brass however then it's CA applied the same way with a cocktail stick, keep one for each.
burbankbill
Illinois, United States
Joined: February 25, 2014
KitMaker: 85 posts
Model Shipwrights: 80 posts
Joined: February 25, 2014
KitMaker: 85 posts
Model Shipwrights: 80 posts
Posted: Friday, June 19, 2015 - 07:14 PM UTC
Aileens Tacky glue is what I use, I think it tackes up quicker than Gator Grip.
Bill
Bill
Biggles2
Quebec, Canada
Joined: January 01, 2004
KitMaker: 7,600 posts
Model Shipwrights: 833 posts
Joined: January 01, 2004
KitMaker: 7,600 posts
Model Shipwrights: 833 posts
Posted: Friday, June 19, 2015 - 08:26 PM UTC
CA for me. I apply with a sharpened toothpick. I used to use bits of stretched sprue, but toothpicks are more plentiful.
Enigma1
Minnesota, United States
Joined: February 22, 2010
KitMaker: 53 posts
Model Shipwrights: 9 posts
Joined: February 22, 2010
KitMaker: 53 posts
Model Shipwrights: 9 posts
Posted: Friday, June 19, 2015 - 10:36 PM UTC
Thanks to everyone for their suggestions I will try to modify my technique for the small bits and pieces on the "Bis". I have 6 months to complete (a bet with my spouse). You Guys Are Great!
Lionfish
Queensland, Australia
Joined: April 14, 2014
KitMaker: 35 posts
Model Shipwrights: 31 posts
Joined: April 14, 2014
KitMaker: 35 posts
Model Shipwrights: 31 posts
Posted: Saturday, June 20, 2015 - 03:19 AM UTC
Gator Glue - thick and thin.... more forgiving than CA and i think it has a stronger and more flexible bond.