Found this little tidbit over on track-link.net
http://www.track-link.net/forum/news_industry/10703
Scheduled to be released in Dec/06.
Woohoo! Can't wait!
Steve
You are viewing the archived version of the site.
Go to modelshipwrights.com for the current dynamic site!
Go to modelshipwrights.com for the current dynamic site!
New Content
Announcements on new content additions to the site.
Announcements on new content additions to the site.
Hosted by Jim Starkweather
Info on Italeri's 1/35 scale PT boat
sdk10159
Oregon, United States
Joined: December 08, 2005
KitMaker: 556 posts
Model Shipwrights: 110 posts
Joined: December 08, 2005
KitMaker: 556 posts
Model Shipwrights: 110 posts
Posted: Friday, October 27, 2006 - 01:29 AM UTC
Posted: Friday, October 27, 2006 - 04:16 AM UTC
Hi Steve,
Picked up the same link. This should be an awesome craft :-) :-) :-) .
Just measured a shelf where it might live :-) :-) :-) .
Sounds brilliant.
10 out of 10 Italeri, if it's half as good as it sounds it will still be brilliant.
I really hope they continue with their 1/35 small boat line of kits.
Cheers
Al
Picked up the same link. This should be an awesome craft :-) :-) :-) .
Just measured a shelf where it might live :-) :-) :-) .
Sounds brilliant.
10 out of 10 Italeri, if it's half as good as it sounds it will still be brilliant.
I really hope they continue with their 1/35 small boat line of kits.
Cheers
Al
sdk10159
Oregon, United States
Joined: December 08, 2005
KitMaker: 556 posts
Model Shipwrights: 110 posts
Joined: December 08, 2005
KitMaker: 556 posts
Model Shipwrights: 110 posts
Posted: Friday, October 27, 2006 - 07:10 AM UTC
Hi Al,
I'm already chomping at the bit over this kit. Can't wait. Trying to figure out if I want to put this beast in a dio or just display it.
Steve
I'm already chomping at the bit over this kit. Can't wait. Trying to figure out if I want to put this beast in a dio or just display it.
Steve
Posted: Friday, October 27, 2006 - 02:29 PM UTC
Hi Steve,
Hard decision, either way it will look massive. Don't know if it's the correct type of boat but the old John Wayne movie comes to mind :-) :-)
Verlinden still have their US Navy Diver and with the U Models Crew and a few mechanics............. :-) :-) :-) :-) plans are already forming :-) :-)
Of course you could build it for display and enjoy it while you build the dio, well for several years at least in my case :-) :-) :-) .
Now if they follow this up with a small Mk 3 LCT ....... :-) :-) :-) :-) :-)
I better start saving.
Cheers
Al
Hard decision, either way it will look massive. Don't know if it's the correct type of boat but the old John Wayne movie comes to mind :-) :-)
Verlinden still have their US Navy Diver and with the U Models Crew and a few mechanics............. :-) :-) :-) :-) plans are already forming :-) :-)
Of course you could build it for display and enjoy it while you build the dio, well for several years at least in my case :-) :-) :-) .
Now if they follow this up with a small Mk 3 LCT ....... :-) :-) :-) :-) :-)
I better start saving.
Cheers
Al
sdk10159
Oregon, United States
Joined: December 08, 2005
KitMaker: 556 posts
Model Shipwrights: 110 posts
Joined: December 08, 2005
KitMaker: 556 posts
Model Shipwrights: 110 posts
Posted: Friday, October 27, 2006 - 11:09 PM UTC
Oh, the possibilities....
I was thinking of using the LCM crew that some manufacturer put out for a start. For the gun crews, I'm probably going to have to modify some armor types.
I want to show the boat in action, possibly as providing gun fire support, as was shown in the movie, PT 109. That means cutting the boat down to a waterline build.
Steve
I was thinking of using the LCM crew that some manufacturer put out for a start. For the gun crews, I'm probably going to have to modify some armor types.
I want to show the boat in action, possibly as providing gun fire support, as was shown in the movie, PT 109. That means cutting the boat down to a waterline build.
Steve
Posted: Saturday, October 28, 2006 - 12:09 AM UTC
Hi Steve,
Re the gun crews, that's a good opporutinity for some AM manufacturer. Accurate Armour already do a 20mm cannon but no crew.
The armament sounds great and if Italeri issue the 40mm boffers as a separtate kit they will double up as the ground based version is long overdue.
Hi Rodolphe!!!!!!!!! :-) :-) :-) New figure opportunities.
I'll have to look into the history and service of the boat a bit more and think thought the possibilities.
I'm currently drooling over pictures LCT Mk 1's LOL, LOL, seems just right for a small boat, the Mk 4 and 5 are just too big and cost a bit tooooooo much for my pocket.
I hope this boat is a seller for them, more chance of something else later :-) :-)
Perhaps Italeri will offer a crew with the boat?? Trumpeter and I think Warrior have some figures that might be suitable for an action setting.
All round this year it's been a good one for the Allies.
Cheers
Al
Re the gun crews, that's a good opporutinity for some AM manufacturer. Accurate Armour already do a 20mm cannon but no crew.
The armament sounds great and if Italeri issue the 40mm boffers as a separtate kit they will double up as the ground based version is long overdue.
Hi Rodolphe!!!!!!!!! :-) :-) :-) New figure opportunities.
I'll have to look into the history and service of the boat a bit more and think thought the possibilities.
I'm currently drooling over pictures LCT Mk 1's LOL, LOL, seems just right for a small boat, the Mk 4 and 5 are just too big and cost a bit tooooooo much for my pocket.
I hope this boat is a seller for them, more chance of something else later :-) :-)
Perhaps Italeri will offer a crew with the boat?? Trumpeter and I think Warrior have some figures that might be suitable for an action setting.
All round this year it's been a good one for the Allies.
Cheers
Al
gatorbait
Louisiana, United States
Joined: August 25, 2002
KitMaker: 252 posts
Model Shipwrights: 21 posts
Joined: August 25, 2002
KitMaker: 252 posts
Model Shipwrights: 21 posts
Posted: Saturday, October 28, 2006 - 08:31 AM UTC
The Warriors LCVP crew are great additions for the PT boat. There may be a few additions. Yeah, it'd be great t ohave some crewmen included and that just may happen. I'm looking forward to this big beauty.
Man, I wish (snivelling here) they'd consider doing the 78' Higgins PT. Gotta admit, the ELCO is gonna be a beaut,though. Mac, I think you might have something huge to add to Pier 51.
Dave
Man, I wish (snivelling here) they'd consider doing the 78' Higgins PT. Gotta admit, the ELCO is gonna be a beaut,though. Mac, I think you might have something huge to add to Pier 51.
Dave
Posted: Saturday, October 28, 2006 - 10:10 AM UTC
Hi Dave,
I'd have to extend the Pier again to fit this beauty in LOL, LOL.
Happy Days.
Cheers
Al
I'd have to extend the Pier again to fit this beauty in LOL, LOL.
Happy Days.
Cheers
Al