Hi All,
is there any news about some correct aftermarket decals fot the Italeri PT? Would be nice if someone would make them so I could finishmy kit. Apparantly the ones in the kit have the black part on the wrong side of the number.
Cheers,
Matthijs
You are viewing the archived version of the site.
Go to modelshipwrights.com for the current dynamic site!
Go to modelshipwrights.com for the current dynamic site!
General Ship Modeling
Discuss modeling techniques, experiences, and ship modeling in general.
Discuss modeling techniques, experiences, and ship modeling in general.
Hosted by Jim Starkweather
Italeri PT boat decals
mat
Limburg, Netherlands
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Posted: Tuesday, February 20, 2007 - 11:21 PM UTC
Posted: Wednesday, February 21, 2007 - 02:55 AM UTC
Ahoy Matthijs.
If you give me the size of the number I may be able to cut you a paint mask.
Kenny
If you give me the size of the number I may be able to cut you a paint mask.
Kenny
Posted: Wednesday, February 21, 2007 - 03:15 AM UTC
Hi Guys,
never being one to miss an opportunity, does anyone know of any 1/35 decals for the RN or RN vehicles? I'm after the white RN letters that you see on the side doors of trucks.
Sorry i canlt help about your question Matthijs, I haven't seen any AM products for the kit around yet.
Cheers
Al
never being one to miss an opportunity, does anyone know of any 1/35 decals for the RN or RN vehicles? I'm after the white RN letters that you see on the side doors of trucks.
Sorry i canlt help about your question Matthijs, I haven't seen any AM products for the kit around yet.
Cheers
Al
mat
Limburg, Netherlands
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Posted: Wednesday, February 21, 2007 - 11:20 PM UTC
Hi Kenny,
thanks a lot for the offer, would it even be possible to cut a mask of a two tone number? Anyways, it's the "596" that is wrong. There is one big number on the stern, each digit is 13 mm tall and 8 mm wide, the shade is 1 mm thick so the size overall is 14 mm by 9 mm. The smaller numbers are exactly half the size of this big number, 2 of them are on the port and 2 are on the starboard side.
Maybe you can start your own AM business?
Regards,
Matthijs
thanks a lot for the offer, would it even be possible to cut a mask of a two tone number? Anyways, it's the "596" that is wrong. There is one big number on the stern, each digit is 13 mm tall and 8 mm wide, the shade is 1 mm thick so the size overall is 14 mm by 9 mm. The smaller numbers are exactly half the size of this big number, 2 of them are on the port and 2 are on the starboard side.
Maybe you can start your own AM business?
Regards,
Matthijs
Gunny
Pennsylvania, United States
Joined: July 13, 2004
KitMaker: 6,705 posts
Model Shipwrights: 4,704 posts
Joined: July 13, 2004
KitMaker: 6,705 posts
Model Shipwrights: 4,704 posts
Posted: Wednesday, February 21, 2007 - 11:27 PM UTC
Quoted Text
Hi Kenny,
Maybe you can start your own AM business?
Regards,
Matthijs
Psssst....Mat, he does. . . take a look here.
Posted: Thursday, February 22, 2007 - 02:54 AM UTC
Quoted Text
Quoted TextHi Kenny,
Maybe you can start your own AM business?
Regards,
Matthijs
Psssst....Mat, he does. . . take a look here.
:-) :-) Mat, does the shadow need to go to the left or the right?
mat
Limburg, Netherlands
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Posted: Friday, February 23, 2007 - 03:49 PM UTC
okay,
I feel rather stupid right now
First I have to make a correction: there is 1 big number on the stern, and there are in total 5 small numbers. The black shade should always be on the right side and on the bottom side.
For some strange reason Italeri made the shades for some numbers top and right and for some top and left.
By the way, they also messed up the USA flag, the stars are all in a nice grid pattern but each "row" should be shifted a bit. There are now 48 starts on the flag. I guess some states have joined Canada or Mexico according to Italeri.
Regards,
Matthijs
I feel rather stupid right now
First I have to make a correction: there is 1 big number on the stern, and there are in total 5 small numbers. The black shade should always be on the right side and on the bottom side.
For some strange reason Italeri made the shades for some numbers top and right and for some top and left.
By the way, they also messed up the USA flag, the stars are all in a nice grid pattern but each "row" should be shifted a bit. There are now 48 starts on the flag. I guess some states have joined Canada or Mexico according to Italeri.
Regards,
Matthijs
Posted: Friday, February 23, 2007 - 04:44 PM UTC
Hi Kenny,
never visited your site before, I'll have to bookmark it and have a veiwing later when I get home.
Could you do RN marking for LCs in1/35? I had a real problem marking all the British Boats and that might be worth investigating.
Catch you later.
Cheers
Al
never visited your site before, I'll have to bookmark it and have a veiwing later when I get home.
Could you do RN marking for LCs in1/35? I had a real problem marking all the British Boats and that might be worth investigating.
Catch you later.
Cheers
Al
Grumpyoldman
_ADVISOR
Florida, United States
Joined: October 17, 2003
KitMaker: 15,338 posts
Model Shipwrights: 981 posts
Joined: October 17, 2003
KitMaker: 15,338 posts
Model Shipwrights: 981 posts
Posted: Friday, February 23, 2007 - 07:00 PM UTC
Quoted Text
There are now 48 starts on the flag. I guess some states have joined Canada or Mexico according to Italeri.
Actually during WW2 there were 48 states.
Posted: Friday, February 23, 2007 - 09:06 PM UTC
Hey Mat. I set of PT numbers coming up. PM me you address.
As far as the flag goes, Alaska and Hawaii were only territories during WW2, not states.
Alan, send me an email showing me what you need and I'll see what I can do.
As far as the flag goes, Alaska and Hawaii were only territories during WW2, not states.
Alan, send me an email showing me what you need and I'll see what I can do.
mat
Limburg, Netherlands
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Posted: Saturday, February 24, 2007 - 12:02 AM UTC
Hi Kenny,
PM has been sent, I didn't know about those two states. I guess I learned something new today
Thanks again for your help!!
PM has been sent, I didn't know about those two states. I guess I learned something new today
Thanks again for your help!!
Hoovie
California, United States
Joined: March 14, 2004
KitMaker: 505 posts
Model Shipwrights: 104 posts
Joined: March 14, 2004
KitMaker: 505 posts
Model Shipwrights: 104 posts
Posted: Saturday, February 24, 2007 - 06:13 AM UTC
Hi Kenny~
no hurry but when is my paint mask comming?
also what colors do you recommend?
thanks~
Ron
no hurry but when is my paint mask comming?
also what colors do you recommend?
thanks~
Ron
Posted: Saturday, February 24, 2007 - 07:19 AM UTC
Hey Ron. Your masks went out yesterday.
As far as the colors go...
Deck Deck Green 20G US16 (WEM color)
Camo 1 #2 Green US23 (WEM color)
Camo 2 #3 Green US24 (WEM color)
Camo 3 Black
Undersides Copperoid or USN Anti-Fouling Red US14 (WEM color)
Kenny
As far as the colors go...
Deck Deck Green 20G US16 (WEM color)
Camo 1 #2 Green US23 (WEM color)
Camo 2 #3 Green US24 (WEM color)
Camo 3 Black
Undersides Copperoid or USN Anti-Fouling Red US14 (WEM color)
Kenny
Posted: Sunday, February 25, 2007 - 11:22 PM UTC
Hiu Kenny,
I'll dig out some pics over the weekend and forward them on
Cheers
Al
I'll dig out some pics over the weekend and forward them on
Cheers
Al
ducati650
Virginia, United States
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Posted: Wednesday, March 07, 2007 - 12:50 AM UTC
Gater
I sent you a message with a mask request.
Thanks,
Ed
I sent you a message with a mask request.
Thanks,
Ed
scaper
California, United States
Joined: July 28, 2005
KitMaker: 6 posts
Model Shipwrights: 2 posts
Joined: July 28, 2005
KitMaker: 6 posts
Model Shipwrights: 2 posts
Posted: Wednesday, March 07, 2007 - 02:17 AM UTC
Archer Fine Transfers just came out with two different sets of PT Boat markings. :-)
mat
Limburg, Netherlands
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Joined: November 18, 2003
KitMaker: 894 posts
Model Shipwrights: 44 posts
Posted: Friday, March 09, 2007 - 02:02 AM UTC
haha,
when it comes to decals this big I prefer masks When used the result looks like the real thing and no silvering ( I really had that )
Lets's all make a bet when the first overpriced PE set comes out. I bet Eduard is the first and it includes torpedo's which you have to roll and glue from 76 different parts :-) :-) :-)
I hope I have my kit is finished before that happens because I even think I would actually buy a set like that
when it comes to decals this big I prefer masks When used the result looks like the real thing and no silvering ( I really had that )
Lets's all make a bet when the first overpriced PE set comes out. I bet Eduard is the first and it includes torpedo's which you have to roll and glue from 76 different parts :-) :-) :-)
I hope I have my kit is finished before that happens because I even think I would actually buy a set like that
ducati650
Virginia, United States
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Posted: Sunday, March 25, 2007 - 05:06 PM UTC
Gator,
I've sent you the dimensions of the masks i need and paypalled you the funds. It has been a couple of weeks and i've not heard anything. i tried to contact you via your website but got no responses. Does the "contact" function on your site work?
Thanks,
Ed
PT 495
I've sent you the dimensions of the masks i need and paypalled you the funds. It has been a couple of weeks and i've not heard anything. i tried to contact you via your website but got no responses. Does the "contact" function on your site work?
Thanks,
Ed
PT 495
Posted: Sunday, March 25, 2007 - 07:22 PM UTC
It should Ed. You mask went out today. Sorry for the delay. I had problems cutting the numbers and I wasn't going to send them out until they were right.
ducati650
Virginia, United States
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Posted: Sunday, March 25, 2007 - 09:07 PM UTC
No problem Gator. I just wasn't sure your site contact link was working. My mail is so bad we are alsways getting mail handed to us by neighbors. Sometimes we don't get things that we know were mailed. I'll keep an eye out for your package. Thanks,
Ed
Ed
ducati650
Virginia, United States
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Posted: Monday, April 02, 2007 - 09:33 PM UTC
Gator,
I got the masks. They look great. Thank you.
Ed
I got the masks. They look great. Thank you.
Ed
Hoovie
California, United States
Joined: March 14, 2004
KitMaker: 505 posts
Model Shipwrights: 104 posts
Joined: March 14, 2004
KitMaker: 505 posts
Model Shipwrights: 104 posts
Posted: Tuesday, April 03, 2007 - 02:45 AM UTC
Gators mask as the numbers as well!
very nice I might add!
Ron
very nice I might add!
Ron
Posted: Tuesday, April 03, 2007 - 04:11 AM UTC
Quoted Text
Gator,
I got the masks. They look great. Thank you.
Ed
Your welcome Ed. I'm looking forward to seeing the photos.
Gator
ducati650
Virginia, United States
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Joined: March 06, 2007
KitMaker: 89 posts
Model Shipwrights: 88 posts
Posted: Sunday, April 08, 2007 - 07:00 PM UTC
I finished using Gator's Star masks to paint the insignia. Worked great. Thanks Gator for the customs. The number masks are next.
Ed
Ed