login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Ships by Class/Type: Carriers
Topics on all types of carriers from the early 20th century to today.
Hosted by Todd Michalak
Enterprise CV 6 - 1942
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Saturday, June 02, 2018 - 10:29 AM UTC
This is my entry for the Flattops Campaign.


As well the Merit kit, there is an Infini upgrade set and deck set.



And a small addition tyo the kit provided air wing


cheers
Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Saturday, June 02, 2018 - 10:48 AM UTC
So with great modelling weather here in Auckland action began on the Big E.
No surprise, this kit is based on Merit's Yorktown.


So this is not the first "Yorktown" carrier in this campaign.

The hull is in one piece.

I like that and wish more manufacturers would do that but it does come with some drawbacks.
There is seam line to deal with along the length of the hull and where they have an insert for the screws and rudder.


The stern is also too sharp so I have softened that off as well.

The process is fairly painless with a sharp knife and some sandpaper we could get onto assembly.

One of the prominent features of the hull is the planking.


I thought, briefly, about toning it down. I have read build reviews of this kit where some have done that and others left. It would be nice if it were subtler but I decided to leave it as is. I also doubted whether I could reduce the effect evenly across the hull

The hangar deck and fore deck come as three pieces. The fit is pretty good.

The hull just needs to be pulled in a fraction, hence the tape.

The foredeck is meant to be fitted at this stage but I left it off as it requires substantial modification from the Infini set as it would be easier to work on.

Filled the gaps after setting the hangar deck

And cleaned it up.


And that was a great way too spend Saturday.

cheers

Michael
RussellE
#306
Visit this Community
Victoria, Australia
Joined: June 27, 2010
KitMaker: 2,265 posts
Model Shipwrights: 1,889 posts
Posted: Sunday, June 03, 2018 - 09:57 AM UTC
Hi Michael!

Great choice of topic for the flat top campaign!

Merit have certainly been making 'waves' the last few years with their releases, often choosing subjects modellers have been crying out for, but largely ignored by the mainstream manufactures.

It looks like they did a fairly decent job on the shape of the hull, but like you say, the planking looks a bit heavy handed.

Looking forward to see you bring this one to life. I've been sorely tempted by their rendition of Ark Royal and Infini's aftermarket, but each time I look in the wallet there doesn't seem to be enough to sponsor that decision
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Sunday, June 03, 2018 - 07:29 PM UTC
Thanks Russ.
I am also tempted to add Ark Royal to the stash. I didn't know Infini did a set for it which makes it more tempting. Their stuff is very nice to work though the instructions leave a bit to be desired.

cheers
Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Sunday, June 03, 2018 - 07:35 PM UTC
Second day of great weather. Heavy rain and some thunderstorms.

Add propulsion and steering.


The screws I will add after I have painted it.

First step of many in the photoetch. It was nice to see one of our own help with the set.

Completed one side of the degaussing cable.


Lost a small piece so made a replacement. I see a bit of detachment which has also been rectified.

cheers

Michael
Cadeus
Visit this Community
Indiana, United States
Joined: September 01, 2015
KitMaker: 135 posts
Model Shipwrights: 130 posts
Posted: Monday, June 04, 2018 - 02:39 AM UTC
This is a kit Iíve wanted since it was announced, Iím following along with interest. Looks good.
d6mst0
#453
Visit this Community
Texas, United States
Joined: August 28, 2016
KitMaker: 545 posts
Model Shipwrights: 195 posts
Posted: Monday, June 04, 2018 - 10:53 AM UTC
Michael,

Off to a fine start. Those degaussing PE sets do make you have to take your time attaching them but they are worth the effort.

Mark
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 5,287 posts
Model Shipwrights: 4,872 posts
Posted: Tuesday, June 05, 2018 - 07:33 AM UTC
Nice progress Michael,

The etched degaussing cable looks great.

Cheers

Si
RussellE
#306
Visit this Community
Victoria, Australia
Joined: June 27, 2010
KitMaker: 2,265 posts
Model Shipwrights: 1,889 posts
Posted: Tuesday, June 05, 2018 - 09:34 AM UTC

Quoted Text

Thanks Russ.
I am also tempted to add Ark Royal to the stash. I didn't know Infini did a set for it which makes it more tempting. Their stuff is very nice to work though the instructions leave a bit to be desired.

cheers
Michael



Sorry, that should be Tetra Model Works, Michael, not Infini-getting my AM producers mixed up. I think Very Fire do a set for the Ark too!

Looking good BTW
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Tuesday, June 05, 2018 - 09:31 PM UTC

Quoted Text

This is a kit Iíve wanted since it was announced, Iím following along with interest. Looks good.



Thanks Norman. Glad to have you along and I hope the kit doesn't disappoint.

cheers
Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Tuesday, June 05, 2018 - 09:32 PM UTC

Quoted Text

Michael,

Off to a fine start. Those degaussing PE sets do make you have to take your time attaching them but they are worth the effort.

Mark



Hi Mark, you're right about the reward for the effort. It should look good under some paint and weathering.

Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Tuesday, June 05, 2018 - 09:34 PM UTC

Quoted Text

Nice progress Michael,

The etched degaussing cable looks great.

Cheers

Si



Cheers Si. The first of many,many bits of etch. This is the first time I used Infini and it is very nice to work with. Easy to get out of the gates and quite soft to bend.

Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Tuesday, June 05, 2018 - 09:36 PM UTC

Quoted Text


Quoted Text

Thanks Russ.
I am also tempted to add Ark Royal to the stash. I didn't know Infini did a set for it which makes it more tempting. Their stuff is very nice to work though the instructions leave a bit to be desired.

cheers
Michael



Sorry, that should be Tetra Model Works, Michael, not Infini-getting my AM producers mixed up. I think Very Fire do a set for the Ark too!

Looking good BTW



No problems Russ. I wonder if my supplier, Dave, does Tetra. He got me the sets for Enterprise.

cheers
Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Tuesday, June 05, 2018 - 09:45 PM UTC
Now I have finished my bit on the side, the Hastings, the serious business can begin.
I managed to clean up the foredeck ahead on the first layers of brass going on.


cheers
Michael
RussellE
#306
Visit this Community
Victoria, Australia
Joined: June 27, 2010
KitMaker: 2,265 posts
Model Shipwrights: 1,889 posts
Posted: Tuesday, June 05, 2018 - 10:09 PM UTC

Quoted Text


Quoted Text


Quoted Text

Thanks Russ.
I am also tempted to add Ark Royal to the stash. I didn't know Infini did a set for it which makes it more tempting. Their stuff is very nice to work though the instructions leave a bit to be desired.

cheers
Michael



Sorry, that should be Tetra Model Works, Michael, not Infini-getting my AM producers mixed up. I think Very Fire do a set for the Ark too!

Looking good BTW



No problems Russ. I wonder if my supplier, Dave, does Tetra. He got me the sets for Enterprise.

cheers
Michael



If not, you could try BNA models
TimReynaga
Staff MemberAssociate Editor
MODEL SHIPWRIGHTS
Visit this Community
California, United States
Joined: May 03, 2006
KitMaker: 1,537 posts
Model Shipwrights: 1,147 posts
Posted: Wednesday, June 06, 2018 - 01:44 AM UTC

Quoted Text

... It would be nice if it were subtler but I decided to leave it as is...

Michael



Hi Michael,

I too was surprised by the heaviness of the kit plating, so I will be interested to see how your Big E looks with the full effect under paint. So far you are making the most of this awesome kit!

Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Monday, June 11, 2018 - 09:51 PM UTC

Quoted Text


Quoted Text

... It would be nice if it were subtler but I decided to leave it as is...

Michael



Hi Michael,

I too was surprised by the heaviness of the kit plating, so I will be interested to see how your Big E looks with the full effect under paint. So far you are making the most of this awesome kit!




Thanks Tim. I think some paint and some distracting rust may do the job

cheers
Michael
Cosimodo
#335
Visit this Community
Auckland, New Zealand
Joined: September 03, 2013
KitMaker: 952 posts
Model Shipwrights: 712 posts
Posted: Monday, June 11, 2018 - 09:58 PM UTC
The weekend saw a few distractions but finished the other side of the degaussing cable.
Started on the forecastle deck.
The gun is a quad 1.1" piece.

The anchor cable gear was all replaced.

There are chains that come with the set but I will leave those until later.



This is just the start. There is lot more etch to go on here including all the structural support for the flight deck and gangways etc.

cheers

Michael
RedDuster
Visit this Community
England - South East, United Kingdom
Joined: March 01, 2010
KitMaker: 5,287 posts
Model Shipwrights: 4,872 posts
Posted: Tuesday, June 12, 2018 - 06:37 AM UTC
Nice work Michael,

The quad 1.1" looks very nice, as does the brass work on the ground tackle.

Looking really good.

Cheers

Si
RussellE
#306
Visit this Community
Victoria, Australia
Joined: June 27, 2010
KitMaker: 2,265 posts
Model Shipwrights: 1,889 posts
Posted: Tuesday, June 12, 2018 - 09:25 AM UTC
What Si said

that's some really nice brass work Michael!

Those Infini sets sure do pack in a lot of value